198
••••
Reliance AutoMate
QUICKDESIGNER
HMI-CAB-C53/A Cable
This cable is used to connect the target display to a Reliance AutoMate.
A label is placed on each end of the cable to indicate which device should be connected to that end.
One of the labels will also indicate the cable part number so you can quickly verify you are using the
right cable for your application. You can make your own cable using the following wiring diagram.
Setup for using a Reliance AutoMate PLC
Use the following procedure to ensure your target device is setup properly for the Reliance AutoMate
PLC. The procedure is in condensed format. Only the required settings are outlined. For additional
details, see Creating a New Project beginning on page 3.
Project Setup
The drawing is a diagram of the Project Setup dialog box. Each button will display an additional dialog
box. Many settings are options and are not required to establish communications. Verify the
Project
name
and
Display Device
Model
are correct. Leave the Initial Screen name blank.
Project name:
Display Device
Model
Initial Screen
Display
Touch
More
PLC & Protocols
CN1
PLC Type
PLC Protocol name appears here
Port
Protocol
System
OK
Cancel
Help
Project Setup
Default Panel Name
Screen Saver Timeout
Panel Trigger Tag
Watchdog Tag
Watchdog timeout
PLC Protocol setup
Disable Beeper
Electrical Format
Serial Parameters
Project name appears in this field
Model description appears in this field
Project Notes
Print (Inactive)
PLC Type
Select the PLC type from the list box.
(Reliance Automate)
.
See PLC Type on page 5.