background image

 

LIMITED ONE YEAR WARRANTY 

This product has been manufactured in the UK by ALLEN & HEATH and is 
warranted to be free from defects in materials or workmanship for a 
period of one year from the date of purchase by the original owner. 

To ensure the high level of performance and reliability for which this 
equipment has been designed and manufactured please read this User 
Guide before operating. 

In the event of a failure notify and return the defective unit to ALLEN & 
HEATH or its authorised agent as soon as possible for repair under 
warranty subject to the following conditions: 

CONDITIONS OF WARRANTY 

1.  The equipment has been installed and operated in accordance with the 

instructions in this User Guide. 

2.  The equipment has not been subject to misuse either intended or 

accidental, neglect, or alteration other than as described in the User 
Guide or Service Manual, or approved by ALLEN & HEATH. 

3.  Any necessary adjustment, alteration, or repair has been made by 

ALLEN & HEATH or its authorised agent. 

4.  The defective unit is to be returned carriage prepaid to ALLEN & 

HEATH or its authorised agent with proof of purchase. 

5.  Units to be returned should be packed to avoid transit damage. 

These terms of warranty apply to UK sales. In other territories the terms 
may vary according to legal requirements. Check with your ALLEN & 
HEATH agent for any additional warranty which may apply. 

 

WZ16:2 User Guide AP2917 Issue 2. copyright © 1998 Allen & Heath. All rights reserved. 

 

MANUFACTURED IN ENGLAND 

ALLEN & HEATH 
Kernick Industrial Estate, 

Penryn, Cornwall, TR10 9LU, UK 
http://www.allen-heath.com 

ALLEN & HEATH AGENT: 

 

 

 

T h i s   p r o d u c t   c o m p l i e s   w i t h   t h e   E u r o p e a n  
Electromagnetic Compatibility Directives 89/336/EEC 
& 92/31/EEC and the European Low Voltage Directives 

73/23/EEC & 93/68/EEC. 

Содержание WZ16:2

















Отзывы: