Surface Getting Started Guide
8
AP10826 Issue 3
Use the
I/O
screen to patch signals from or to the I/O Ports.
Screen Out
–
VGA port for connection of an external monitor. The external
monitor can mirror either of the touchscreen views or display a third view. Use the
Surface / Screen
screen to configure.
External touchscreens are not supported.
Phones
(C1500 only) -
Standard 1/4” and 1/8” jack sockets. Another pair of
sockets is located under the armrest.
Status indicators
–
Power ON indicator. The Ready indicator lights up
when the output sockets are ready to pass audio after power up.
Power Supply
–
Mains IEC socket, fuse and On/Off rocker switch.
Heed the safety warnings printed on the panel.
A plastic P-clip cable clamp is provided to secure the mains cable. Slot the cable in
or lock it in place using a star Torx
©
T20 screwdriver to refit the clamp around the
cable.
Kensington Lock
- A slot for fitting standard Kensington anti-theft security
devices.
DX link
–
EtherCon port for connection of a DX expander over Fast Ethernet
(IEEE 802.3 Layer 2 compliant). A single Cat5e (or higher) cable carries 32x32
channels of 96kHz audio and control.
Use the
I/O
screen to patch signals from or to the DX expanders.
Word Clock I/O
- BNC connector for syncing from an external audio clock
or providing a clock to other devices.
Network
–
2 RJ45 Gigabit Ethernet ports. Connect a laptop or a wireless
router to use with dLive Editor or iOS apps. All devices on the network must have
compatible IP addresses.
gigaACE link
–
MixRack to Surface link over Gigabit Ethernet (IEEE 802.3
Layer 2 compliant). A single Cat5e (or higher) cable carries bidirectional 96kHz audio
and control.
Control Network
Secondary
ALLEN
Primary
Lnk/Act
Lnk/Act
GigE
Lnk/Act
HEATH
&
6
7
8
9
10
11
12
13
14
14
12
13
10
11
15
