Surface Getting Started Guide
17
AP10826 Issue 3
4.4
Connect a laptop or wireless router
Connect a laptop, router or access point to either of the Network ports to use with dLive Editor or iOS apps.
Read the Release Notes and Help Files accompanying the software or apps for further information.
dLive communicates over TCP/IP. All devices on the network including the MixRack
and Surface must have compatible IP addresses. Factory defaults are:
MixRack
192.168.1.70
Surface
192.168.1.71
Subnet Mask
255.255.255.0
Gateway
192.168.1.254
For direct, wired laptop connections, set your laptop to a static, compatible IP
address, for example
192.168.1.10
.
For wireless connections, set your router / access point to a compatible IP address,
for example 192.168.1.254, and its DHCP range to a compatible range of addresses,
for example
192.168.1.100
to
192.168.1.200
. Set any wireless laptop or mobile device
to DHCP / ‘obtain an IP address automatically’.
