ALL-TEST PRO ATPOL II, Руководство пользователя

Страница: 106 / 109

106
Harmonics
– for measuring THD and individual harmonics (combine it with the More button for more
information)
More - for getting more detailed information (such as max/min/avg or estimates of per hour/month/year)
after pressing one of the other keys
Volt
– read phase-phase or phase-neutral true RMS voltage (combine it with the More button for more
information)
Current
– read true RMS current of any phase or neutral (combine it with the More button for more
information)
Power
– read true power (watts), VA, or VAR (combine it with the More button for more information)
Energy
– read energy consumed (KWH) (obtain estimates with the [More] key)
Cost
– read cost of energy consumed (obtain estimates with the [More] key)
Freq
– read fundamental frequency (combine it with the More button for more information)
On/Off Cycles
– duty cycle, number of on/off cycles, “on” time (combine it with the More button for
more information)
Power Factor
– true power factor and displacement power factor (combine it with the More button for
more information)
Demand Period
– amount of demand and time of peak demand period (combine it with the More
button for more information)
Time
– present time, elapsed time, time capacity of log (combine it with the More button for more
information)
Yes/Accept
– for use in answering questions or accepting entries
No/Reject
– for use in answering questions or rejecting entries
Increment
– for incrementing letters or numbers
Decrement
– for decrementing letters or numbers
Capture Waveforms
– for capturing waveform sets inside the meter
Admin
– for identifying serial number, hardware/software versions, installed options, or warranty
expiration date. For changing the time, date, greeting, or 2 current power mode.
Measure Mode
– set voltage measurement mode, frequency measurement mode, power
measurement mode
Setup /

– for checking if the unit is connected correctly, setting trigger thresholds for capturing
events, logging interval, cost of energy, “on” current, and for moving cursor to the left
Input Ratios /

– for setting input ratios and for moving cursor to the right
On/Off
– Turns the meter on and off