manualshive.com logo in svg

Alimak Scando 650 DOL, Техническое описание

Поделиться
Скачать
Alimak Scando 650 DOL Скачать руководство пользователя страница 30

Optional lifting tool for use with on site cranes

The preferred method of assembling the lift system is the use of
a crane with sufficient lifting height.

3 – 5 mast sections (never exceeding the mast’s freestanding
capability) can be assembled lying on the ground before being
lifted to the mast top and assembled.

We recommend attaching the load according to the figure in
order to avoid driving the car to the top of the mast in order to
disconnect the load from the crane hook.

The user’s own protective measures

Protection at the landings

It is recommended that overhead protection is furnished at
landing entrances to protect against falling objects.

Scaffolds and other gangways close to the hoistway

Scaffolds and other gangways and platforms close to the hoist-
way shall be provided with enclosures according to local
regulations.

Illumination of landings

Adequate site lighting shall be provided to illuminate the
landings over the full height of travel of the hoist.

Landings erected at site

Landings built on site shall be equipped with safety railings and
toe guards and shall meet applicable local regulations.

Each landing shall be designed for the maximum load of the
hoist.

ALIMAK  34762  -  1/01

A

24

Содержание Scando 650 DOL





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды