Steps
1.
Lay the computer on the right side.
2.
Slide the power-supply unit cage release latches to the unlock position.
3.
Lift the power-supply unit cage.
4.
Rotate the power-supply unit cage away from the chassis.
5.
Loosen the two captive screws that secure the VR heat sink to the system board.
6.
Remove the four screws (#6-32) that secure the radiator and fan assembly to the radiator and fan cage.
7.
Lift the VR heat sink off the computer.
8.
Disconnect the processor-cooling assembly cables from the system board.
9.
In the reverse sequential order (as indicated on the processor cooler), loosen the four captive screws that secure the processor
cooler to the system board.
NOTE: If your are using an electric screwdriver, torque the screws at 6.9 +/-1.15 kilogram-force centimeter (6 +/-1
pound force inch).
10.
Lift the processor-cooling assembly along with the cables off the computer.
37
Содержание Aurora R9
