Steps
1.
Place the power supply on the chassis.
2.
Align the screw holes on the power-supply unit with the screw holes on the chassis.
3.
Replace the four screws (#6-32) that secure the power-supply unit to the chassis.
4.
Lift and rotate the power-supply unit cage away from the chassis
5.
Connect the processor-power cable and system-board power cable to the system board.
6.
Connect the power cables to the hard drives.
7.
Connect the power cables to the graphics card.
8.
Rotate the power-supply unit cage towards the chassis
9.
Slide the power-supply unit cage release latches towards the locked position.
10.
Align the screw holes on the power-supply unit bracket with the screw holes on the power-supply unit cage.
11.
Replace the two screws (#6-32) that secure the power-supply unit bracket to the power-supply unit cage.
Next steps
1.
.
2.
Follow the procedure in
After working inside your computer
.
850 W Power-supply unit
Removing the 850 W power-supply unit
Prerequisites
1.
Follow the procedure in
Before working inside your computer
2.
.
31
Содержание Aurora R9
