29
HD-TVI 23x Zoom PTZ Camera User Manual
PRELIMINARY
SECTION 4: CONFIGURING THE PTZ CAMERA
For remote access to the ALIBI HVR
: Navigation and settings in the OSD are made through direction keys and the
Iris +
and
Iris -
buttons in the ALIBI HVR PTZ control panel. See above.
The function of the directional keys and Iris buttons are defined in the table below.
Icon
Function
p
Move up in the parameter list, or when the position icon is , change parameter value (up) shown.
q
Move down in the parameter list, or when the position icon is , change parameter value (down) shown.
t
Move to previous page, field, or move the camera left.
u
Move to next page, field, or move field right.
Iris+
(OPEN)
Select parameter, set parameter value, or open sub-menu
Iris–
(CLOSE)
Cancel change of parameter.
(
p
,
q
,
t
,
u
) can move the position in the menu up (to parameter above, or previous parameter value), down, left (to next
screen), or right (to previous screen).
Position icons
NOTE
For clarity, the video background was removed from most OSD screens shown in the following sections of this document.
Position icons that appear on the OSD menus indicate whether the OSD is in “navigation” mode (for moving throughout the menu
system) or “parameter setting” mode, where parameter values can be changed. These position icons appear as diamond-shaped
symbols that appear to the left of an OSD parameter line. Examine the typical menus shown below, where the diamond symbols
precede the first line of each menu.
Menu with OSD in navigation mode
Position icons
Menu with OSD in parameter setting mode
