64
PRELIMINARY
SECTION 5: OSD MENU REFERENCE
5.
Use the
p
and
q
buttons to move the position icon to the EDIT PATROL option, and then click
Iris+
to open the edit
screen.
6.
On the first line (NUM 1) of the edit screen, click the
u
buttons to move the position icon to the PST (preset) field.
7.
Use the
p
and
q
buttons to select the first preset of the patrol. This will be the first surveillance target the camera points
at when the patrol is executed.
8.
Click the
u
buttons to move the position icon to the DWELL field, and then use the
p
and
q
buttons to select the dwell
time (time to stay on the preset target before changing to the next preset of the patrol). Dwell time can be 5, 10, 15, 20, 25,
30, 40, etc. seconds.
9.
Click the
u
buttons to move the position icon to the SPD (speed) field, and then use the
p
and
q
buttons to select the
relative speed at which the camera moves to the preset. Values for the SPD field can be 1 .. 40.
10. Click the
t
buttons three times to return to the NUM column, and then click the
q
to advance to the nest row.
11. Repeat the procedure in steps
6
through
10
above add additional presets to the patrol as needed.
12. Click
IRIS+
to save the patrol setup and return to the PATROLS menu.
NOTE
If you call
Preset46
to enable the fast patrol, the camera will execute the patrol automatically according to the route
configured in preset 1 to preset 32. You can also set the
Patrol-D
(dwell) time for switching from one preset to another.
Patrol-D
can be set to 5S, 10S, 20S, 30S, or 60S.
Preview a patrol
1.
In the PATROLS menu, move the position icon to the PATROL NUM option, and then click
Iris+
.
2.
Use the
p
and
q
buttons to select the number of the patrol you want to preview, and then click
Iris+
.
