42
PRELIMINARY
SECTION 4: CONFIGURING THE PTZ CAMERA
2.
Click
Iris+
to change the PRESET NUM field.
3.
Use the
p
and
q
buttons to change the number shown for the preset number. Presets can be numbered from 1 .. 256.
4.
Click
IRIS+
to create the preset.
5.
Move the position icon to the PRESET PTZ option, and then click
Iris+
.
6.
Use the focus, zoom and iris controls and direction buttons to point the camera at your preset target, then click
Iris+
to save
the preset and return to the PRESETS menu.
7.
Repeat steps
2
through
6
above to create additional presets.
4.8.2 Call a preset
Through a web browser connected to your DVR, select the preset number from the preset list in the control panel of the DVR, then
click the icon to call the preset.
4.8.3 Clear a preset:
1.
Open the
PRESETS
menu, and then select the
PRESET NUM
ber to clear.
2.
Move the position icon to the
CLEAR
option, click
Iris+
, and then click
Iris+
again to confirm the action.
4.9 Step 6: Configure Patrols
A patrol is a memorized series of preset function. Before configuring a patrol, the presets that will become part of a patrol must be
created. When creating a patrol, each preset is assigned a Dwell time, the duration the camera pauses on the preset before moving
to the next preset in the patrol. You can create up to 10 patrols, and then invoke both automatically or manually when needed.
