36
PRELIMINARY
SECTION 4: CONFIGURING THE PTZ CAMERA
7.
Click the
Focus+
button to open the SIZE adjustment screen (see right screen above). Use the Use the
u
and
t
buttons to
increase and decrease the with of the blank, and use the
p
and
q
buttons to increase or decrease the height of the blank.
8.
Click
IRIS+
to save the blank.
9.
Use steps
2
through
8
above to create additional blanks if needed.
4.6 Step 3: Configuring OSD settings
The SYS INFO SETTINGS submenus are provided to adjust the general system parameters including software setup of the RS-485
network settings, fan and heat control, and other options. It also includes two submenus for setting the system time and display
options, and an additional screen for setting the ZERO ANGLE. To configure these settings:
1.
Open the
SYS INFO SETTINGS
submenu from the OSD
MAIN MENUS | DOME SETTINGS
menu. The SYS INFO SETTINGS
submenu includes three pages; you can move between these pages using the
u
and the
t
buttons.
SYS INFO SETTINGS page 1
SYS INFO SETTINGS page 2
SYS INFO SETTINGS page 3
