ALGE-Timing TELEDATA TED-RX Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 31

ALGE-Timing TELEDATA TED-RX Скачать руководство пользователя страница 27

TED-TX / RX

Page 27

Version: E-2000-03-02

Page 27

5.3. Data Transmission 2400 Baud:

Adjustment:

Code-switch (12) from TED-TX and TED-RX on position 3.

Each data string must be sent with control characters at the begin and at the end. The control
character at the begin turns the transmitter on, the control character at the end turns it off. If you do
not send a control character at the end, the transmitter will turn off automatically 10 sec. after the
last data was sent.

Start Control Character:

01 Hex. (minimum 10 times)

End Control Character:

04 Hex.

Advantage:

This mode does save the battery of the transmitter (TED-TX), since the transmitter
is only on when you send data. The data string between the start and end control
character can have any protocol.

Disadvantage: Each data string needs a control character at the begin and end to turn the TED-

TX on or off.

Operation:

Wireless data transmission from one device to another (e.g. PC to PC).

5.4. Data Transmission 4800 Baud:

Adjustment:

Code-switch (12) from TED-TX and TED-RX on position 4.

Each data string must be sent with control characters at the begin and at the end. The control
character at the begin turns the transmitter on, the control character at the end turns it off. If you do
not send a control character at the end, the transmitter will turn off automatically 10 sec. after the
last data was sent.

Start Control Character:

01 Hex. (minimum 10 times)

End Control Character:

04 Hex.

Advantage:

This mode does save the battery of the transmitter (TED-TX), since the transmitter
is only on when you send data. The data string between the start and end control
character can have any protocol.

Disadvantage: Each data string needs a control character at the begin and end to turn the TED-

TX on or off.

Operation:

Wireless data transmission from one device to another (e.g. PC to PC).

«
...
25
26
27
28
29
...
»

Содержание TELEDATA TED-RX
































Отзывы:

Нет отзывов