ALGE-Timing TELEDATA TED-RX Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 31

ALGE-Timing TELEDATA TED-RX Скачать руководство пользователя страница 12

TED-TX / RX

Page 12

3.2. Switching on:

Normal Mode:

- switch device-switch (11) on
- TED works in the impulse transmission mode

Test-Mode:

- press device-key (10)
- device-switch (11) to position ON, LED (3) must blink
- release device-key (10)
- test mode switches automatically off after one minute,

manually you can switch it off with device-key (10).

Impulse Transmission:

device-switch (11) to position ON, LED (3) must blink

Data Transmission ALGE 1 Sec.:

-

device-switch (11) to position ON, LED (3) must blink

-

when a data string with the right format arrives at the
TED-TX it switches to this mode.

Data Transmission ALGE 0.1 Sec.: - set code switch (12) from TED-TX and RX on position 1

- device-switch (11) to position ON, LED (3) must blink

Data Transmission 2400 Baud:

- set code switch (12) from TED-TX and RX on position 3
- device-switch (11) to position ON, LED (3) must blink
- transmission of each data string with 2400 Baud
- each data string needs a code at the start and end

Data Transmission 4800 Baud:

- set code switch (12) from TED-TX and RX on position 4
- device-switch (11) to position ON, LED (3) must blink
- transmission of each data string with 4800 Baud
- each data string needs a code at the start and end

Data Transmission "Direct":

- set code switch (12) from TED-TX and RX on position 6
- device-switch (11) to position ON, LED (3) must blink
- transmission of each data string (with 2400 or 4800 Baud)

3.3. Choosing the Operation Modes:

You get as well into the signal strength test by making three short cuts between the green (5) and
black (6) banana socket within a short time..

Switch

Signale Mode

Data Mode

position 0: data transmission ALGE 1 sec.
position 1: data transmission ALGE 0.1 sec.

position 0 to 9

position 2: no function

code switch (12)

to select the

position 3: data transmission 2400 Baud

timing channel

position 4: data transmission 4800 Baud
position 6: data transmission direct
position 7 to 9: no function

code switch (9)

for address

for address

device key (10) field strength on/off transmit last data string again

«
...
10
11
12
13
14
...
»

Содержание TELEDATA TED-RX
































Отзывы:

Нет отзывов