DC UPS
2)
The load should continue to be powered from the battery, the ‘’AC’’ LED should be off and the
“Discharging’’ LED should be on.
3)
Reconnect the AC power cable
to the DC UPS. The "AC” LED and "Charging" LED must be on.
F
í
v
e
l
B
1)
To connect the Manageable DC UPS to the network, connect an Ethernet Cable
.
2)
The factory setting is as follows: IP 192.168.1.50 User name: admin Password: admin. If you need
to return to the initial IP configuration and password, press the Reset button for 10 seconds.
Fuse table
Model
AC fuse
Battery fuse
12V 20A
5A
20A
24V 10A
15A
24V 15A
15A
-48V 5A
10A
-48V 10A
6,3A
15A
9 TABLE OF FUSES BY MODEL
10 SNMP INSTALLATION
AC LED
DISCHARGING
LED
OUTPUT
INDICATOR LED
Reconnect the
AC power cable
AC LED
CHARGING
LED
OUTPUT
INDICATOR
LED
