Alfresco ALF-PZA, Инструкция по использованию и уходу

Страница: 17 / 32

17
PREHEATING THE OVEN IR-BURNER:
Preheating the IR BURNER at maximum is important to allow proper combustion at lower settings later
on as well as speeding up the process of heating up the oven. After lighting the IR BURNER as
described before, allow to preheat on “HI” for 15 minutes before beginning to cook.
Preheat the IR-BURNER first, this will also preheat the Hearth Stone and the oven as a whole.
PREHEATING THE CERAMIC LOG:
Preheating the Ceramic Log is not necessary. The Ceramic log sits directly in the exhaust flue of the
Hearth Stone IR-Burner, therefore it will be already preheated by the time the oven reaches cooking
temperatures.
The Ceramic Log Burner is used to create a blast of hot air and infra red heat to reach searing
temperatures very fast. It should not be left on HI setting for long times as it will make the oven very hot
beyond usable cooking temperatures.
BURNER AND PILOT ADJUSTMENTS:
NOTE: The
Alfresco
™ Pizza Oven Burners do not require air-mix adjustment and need only be
checked visually for proper performance and low temperature settings only.
The
Alfresco
™ Pizza Oven is equipped with adjustable valves.
Valves can be adjusted for PILOT flame size and burner LOW
settings.
This procedure can be done by removing the gas adjustment
knobs on the front panel to expose the valve adjustment screws.
(See Figure # 11)
WARNING
DO NOT ATTEMPT TO LIGHT
THE OVEN PILOTS IF THE
ODOR OF GAS IS PRESENT.
Figure # 11
PILOT ADJUSTMENT
SCREW
KNOB REMOVED
FROM PANEL
LOW SETTING
ADJUSTMENT
SCREW