Alfresco ALF-PZA, Инструкция по использованию и уходу

Страница: 13 / 32

13
When considering installing the gas supply through the bottom of a non-combustible countertop, it is
recommended to have a 4” diameter hole located as shown on Figure # 7 for piping and electrical re-
quirements.
The center of the 4” Ø hole should be located 2-1/2” from the back panel and 4” from the right side of
the oven base. Keep in mind the final location, clearance to non-combustible materials and free exhaust
clearances required for the Pizza Oven when locating such access hole.
It is highly recommended that the 4” Ø hole be constructed in such manner as to provide with a 3/8”
raised lip to prevent water or spills on the countertop from falling into the under-counter section.
It is recommended to install an access door such as
Alfresco
™ AB-30 double sided doors, in order
to reach the LP Gas Tank or the NG Supply Gas Line shut-off valve as well as the GFCI receptacle to
disconnect power to the Pizza Oven.
BUILT-IN INSTALLATIONS:
Your
Alfresco
™ Pizza oven can be converted to a built-in pizza oven by installing the ALF-PZA-BIA
kit onto the unit. Built -in units require the use of non combustible masonry materials for safety.
The Built-in conversion Kit consists of 3 items:
•
A high pitched top cover
•
A Type B, adjustable, double-walled vent pipe
•
A Type B vent cap.
Figure # 7