manualshive.com logo in svg

ALDI WORKZONE HBS20, Руководство пользователя

Поделиться
Скачать
ALDI WORKZONE HBS20 Скачать руководство пользователя страница 7

12

AFTER SALES SUPPORT

 

[email protected]

 

 

1300 855 831

MODEL: HBS20 PRODUCT CODE: 60339  04/2018

AUS

Layout/Scope of delivery

HBS20

38.  Allen screw for top guide pins
39.  Retainer (top)
40.  Allen screw for top retainer (2x)
41.  Allen screw for bottom support bearing
42.  Bottom support bearing
43.  Screw for bottom retainer
44.  Saw band protection
45.  Allen screw for bottom guide pins
46.  Bottom guide pin
47.  Retainer (bottom)
48.  Push stick retainer
49.  Screw (saw table adjustment)
50.  Nut (saw table adjustment)

III. Scope of delivery

•  Bandsaw
•  Saw table
•  Push stick 
•  Parallel stop
•  Open-ended spanner, size 10/13
•  Allen key, size 3/4
•  Screwdriver
•  Instruction manual
•  Warranty card

• 

Open the packaging and remove the device carefully.

• 

Remove the packaging material as well as the packaging and transport bracing  

(if available).

• 

Check that the delivery is complete.

• 

Check the device and accessory parts for transport damage.

• 

If possible, store the packaging until the warranty period has expired.

m 

ATTENTION!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic bags, film and small parts! 

There is a risk of swallowing and suffocation!

Содержание WORKZONE HBS20































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды