manualshive.com logo in svg

ALDI WORKZONE HBS20, Руководство пользователя

Поделиться
Скачать
ALDI WORKZONE HBS20 Скачать руководство пользователя страница 16

21

AFTER SALES SUPPORT

 

 

1300 855 831

 

[email protected]

MODEL: HBS20    PRODUCT CODE: 60339  04/2018

AUS

HBS20

Attachment 

cover locking mechanisms (10) with the help of the screwdriver (29).

Adjusting the saw band guide (Fig. 5 - 8)

•  Both the support bearing (36 + 42) and the guide pins (37 + 46) must be readjust-

ed after every saw band change. 

•  Open the side covers (11) by undoing the cover locking mechanisms (10) with the 

help of the screwdriver (29). 

Top support bearing (36) (Fig.5) 

•  Undo Allen screw for top support bearing (35).
• 

Move top support bearing (36) sufficiently far that it just no longer touches the saw 

band (21) (distance max. 0.5 mm). 

•  Retighten the allen screw for top support bearing (35).

Adjusting the bottom support bearing (42) 

•  Disassemble the saw table.
•  Undo Allen screw for bottom support bearing (41).
• 

Move bottom support bearing (42) sufficiently far that it just no longer touches the 

saw band (21) (distance max. 0.5 mm).

•  Retighten Allen screw for bottom support bearing (41).

Adjusting the top guide pins (37) 

•  Undo Allen screw for top retainer (40). 
•  Move top retainer (39), top guide pins (37), until the front edge of the top guide 

pins (37) is approx. 1 mm behind the tooth base of the saw band. 

•  Retighten Allen screw for top retainer (40). 

•  ATTENTION!

 The saw band will be unusable if the teeth touch the guide pins with 

the saw band running. 

•  Undo Allen screws for top guide pins (38). 
•  Slide the top guide pins (37) in the direction of the saw band! 

•  ATTENTION!

 The distance between the top guide pins (37) and saw band (21) 

must not exceed 0.5 mm. (Saw band must not jam) 

•  Retighten Allen screws (38). 
•  Turn the top saw band roller (2) a few times in a clockwise direction. 
•  Check the setting of the top guide pins (37) again and adjust if necessary.
•  If necessary, adjust the top support bearing (36).

Содержание WORKZONE HBS20































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды