manualshive.com logo in svg

ALDI WORKZONE HBS20, Руководство пользователя

Поделиться
Скачать
ALDI WORKZONE HBS20 Скачать руководство пользователя страница 13

18

AFTER SALES SUPPORT

 

[email protected]

 

 

1300 855 831

MODEL: HBS20 PRODUCT CODE: 60339  04/2018

AUS

Safety regulations

HBS20

•  Never use guards to lift or transport items.
•  Ensure that the saw band guards are used and correctly adjusted.
•  Keep your hands a safety distance away from the bandsaw blade. Use a push 

stick for narrow cuts.

•  The push stick has to be stored on the intended device, so that it can be reached 

from normal working position and is always ready to be used.

•  In the normal operating position the operator is in front of the machine.

Residual risks

The machine has been built using modern technology in accordance with recognized 

safety rules. Some remaining hazards, however, may still exist. 

• 

Risk of injury for fingers and hands by the rotating saw band due to improper 

handling of the work piece. 

•  Risk of injury through the hurling work piece due to improper handling, such as 

working without the push stick. 

•  Risk of damaging your health due to wood dust and wood chips. Wear personal 

protective cloth such as goggles. Use a fitting dust extractor. 

•  Risk of injury due to defective saw band. Regularely check saw band for such 

defects. 

• 

Risk of injury for fingers and hands while changing saw band. Wear proper gloves. 

•  Risk of injury due to starting saw band while switching on the machine. 

•  The use of incorrect or damaged mains cables can lead to injuries caused by 

electricity. 

• 

Wear only closefitting clothes. Remove rings, bracelets and other jewellery. 

•  For the safety of long hair, wear a cap or hair net. Even when all safety measures 

are taken, some remaining hazards which are not yet evident may still be present. 

•  Remaining hazards can be minimized by following the instructions in “Safety 

regulations“ and in the entire operating manual.

Содержание WORKZONE HBS20































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды