manualshive.com logo in svg

ALDI WORKZONE HBS20, Руководство пользователя

Поделиться
Скачать
ALDI WORKZONE HBS20 Скачать руководство пользователя страница 23

28

AFTER SALES SUPPORT

 

[email protected]

 

 

1300 855 831

MODEL: HBS20 PRODUCT CODE: 60339  04/2018

AUS

Technical data/Transport/Cleaning and maintenance

HBS20

Wear hearing protection.

The effects of noise can cause a loss of hearing. Keep the noise level and vibra-

tion to a minimum! 

•  Only use faultless devices. 

•  Maintain and clean the device at regular intervals.

•  Adapt your working methods to the device. 

•  Do not overload the device. 

•  Have the device checked if necessary.

•  Switch the device off if it is not in use.

XI. Transport

The machine must only be lifted and transported on its frame or the frame plate. 

Never lift the machine at the safety devices, the adjusting levers, or the saw table.

During the transport the saw band protection must be in the lowest position and 

near the table.

Never raise at the table! 
Unplug the machine from the mains during transport. 

XII. Cleaning and maintenance

Warning! Prior to any adjustment, maintenance or service work disconnect the mains 
power plug!

Cleaning

•  Keep all safety devices, air vents and the motor housing free of dirt and dust as far 

as possible. Wipe the equipment with a clean cloth or blow it with compressed air 
at low pressure. 

• 

We recommend that you clean the device immediately each time you have finished 

using it. 

Maintenance

There are no parts inside the equipment which require additional maintenance.

Содержание WORKZONE HBS20































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды