Alcorn Mcbride V16Pro, Руководство пользователя

Страница: 175 / 179

Live Mode Protocol Page 175
T
ro
u
b
le
Sh
o
o
ting
s - the ASCII letter 's'
<index of sequence> - the zero indexed number of the sequence in the "sequences" view of WinScriptLive
<sequence state> - The sequence running state: Stopped =0, Running = 1, Paused = 2
<frames> - The sequence's current time (in frames)
<event1> ....<eventN> - The event indexes most recently executed by the sequence.
Note: <frames> and <event> items are sent if the show controller has received a "resource request" for
that particular sequence. Otherwise, only the sequence state is sent along with "0" for <frames>.
Resource Requests
To request the status of a variable, input, output, or sequence, use the following format. (All messages end
in a carriage return 0x0D).
<type>|<bool>|<index>|<device>|<listIndex>LV
•
<type> = single ascii character the item type (see Resource Type Lookup)
•
<bool>
= 0/1, Don’t watch or turn off / Watch or turn on
•
<index> = zero indexed resource number: Example input7 = 6
•
<device> = zero indexed device number (for device variables, inputs, etc.) from the "devices"
table in WinScript
•
<listIndex> = if this variable is a "list" type variable (array), the position in the array to retrieve.
Zero indexed only if the variable itself uses zero indexing, otherwise 1 indexed.
If <listindex> is unused, use "-1" as a placeholder. If <listIndex> does not apply (in the case of inputs,
outputs, etc), remove from command.
Currently there is no ability to watch only a specific bit of an integer variable. If watching a specific bit,
watch the entire integer variable and filter on the application/PC side.
Resource Type Lookup
Sequence s
Variable v
Input i
Output o
Button b
Display d
Event e
Device c
Watch w
Trigger t
Analog Input a
Analog Output g
Error (see Error Section for more details) z
User Log Message (Log Message Event) u
Example Resource Requests
Watch "Input5"