30
August 18, 2020
AES67 TRANSMITTER
In the AES67 transmitter you will need to fill the following settings
1.
Enable:
used to turn the Transmitter on or off.
2.
Transmitter Name:
This setting is done on the properties tab for the component. We recommend
using a name that can be easily related to the station that it belongs to.
3.
Multicast Address:
This is the network Multicast IP that the stream is assigned to.
As default, the
transmitter with be something like 239.69.xxx.xxx, however, you will want to give the transmitter a static IP
otherwise any time the core re-boots or a design is pushed you might loose your routing from core to the station.
4.
Stream Name:
A user defined name for the audio stream. This is the name that will appear on the
transmitter list in Dante controller.
5.
Interface:
Select which Q-Lan to use: Lan-A, Lan-B or Auto select.
