23
August 18, 2020
1.
Title Bar:
Basic plugin information. Station type.
2.
Firmware:
Station firmware version.
3.
Plugin:
Plugin version
4.
Link:
Use this button to associate a physical station with the plugin component (refer to “Linking a
Station” section on the next page).
5.
ID:
Pressing the Button will make the indicators of the V-Com station blink momentarily
6.
Status Bar:
A graphic representation of an active VC12X hardware. (Red: Disconnected. Green:
Connected)
7.
Station Name:
You can give the station a unique descriptive name to differentiate from other V-Com
stations.
8.
Matrix Input:
The Matrix Input, corresponding to the station number on the Intercom Matrix Router.
9.
Party Line:
Assigns the station to a Party Line, also referred as “Home Party Line”
10.
Control IP Address:
The IP Address of the V-Com station.
11.
Audio IP Address:
The IP Address of the audio stream.
12.
Audio Stream:
The type of digital audio stream used (Dante or AES67).
13.
Emulation Mode:
Allows the plugin and V-Com station to be used without a core for programing
purposes.
14.
Online:
LED is on if the V-Com station is currently connected to the Core.
1
2
3
4 5
7
8
9
10
11
12
13
14
