25
August 18, 2020
25.
Button Function:
a.
None:
No function assigned to the button.
b.
Party Line Select:
Select from the drop-down menu which Party Line you what to be on
when the station’s button is pressed. Party Lines are configured through the Intercom Matrix
Plugin.
c.
Toggle:
When pressed, the control pin “LED” will toggle states. ON, OFF (01), (10). This can
be used to interface to other control pins within Q-sys like mute functions. In this mode, the
button LED will represent the state of the ‘State LED’ control pin.
d.
Momentary:
This is like the toggle mode except that the control pin “State LED” will
momentarily pulse to a value of 1 and then go back to 0. In this mode, the V-Com button LED
can be manually controlled using the control pin “Input LED”.
26.
Ring Zone:
Select from the drop-down menu what stations will ring when the button is called. Stations
are assigned to Ring Zones through the Intercom Matrix Plugin.
27.
Active:
LED will light up when the Party Line is in use.
28.
Light:
Will replicate the current condition of the button. In Breakaway mode, the led is controlled by the
“Light Input” Control pin.
29.
State LED
:
a.
Toggle:
When pressed, the control pin “LED” will toggle states. ON, OFF (01), (10). This can
be used to interface to other control pins within Q-sys like mute functions. In this mode, the
button LED will represent the state of the ‘State LED’ control pin.
b.
Momentary:
This is like the toggle mode except that the control pin “State LED” will
momentarily pulse to a value of 1 and then go back to 0. In this mode, the V-Com button LED
can be manually controlled using the control pin “Input LED”.
25
26
27
28 29
