Page 38 Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010
PW
Get/Set Password
Description:
This command will get or set the password.
Comments:
The default password is password.
Get command:
PW<0D>
Message Response:
password<0D>
Set command:
passwordPW<0D>
Message Response:
R<0D>
DST Enable
Description:
This command will get or set the status of the daylight saving time
parameter.
Comments:
0 = Standard Time, 1 = using DST.
Get command:
SD<0D>
Message Response:
current setting<0D>
Set command:
1SD<0D>
Message Response:
R<0D>
DST Type
Description:
This command will get or set the status of the daylight saving time
Type.
Comments:
Example are: 1 = US, 2 = Universal, 3 = Australia, 4 = Europe.
Get command:
DT<0D>
Message Response:
current setting<0D>
Set command:
1DT<0D>
Message Response:
R<0D>
Time Zone
Description:
This command will get or set the Time Zone.
Comments:
The time zone 0 is the Greenwich Mean Time GMT. Time zones
going west are given –1 numbers and +1 going east from GMT 0
until the International Date Line is reached. Eastern TZ in the
USA is -5
Get command:
TZ<0D>
Message Response:
current timezone<0D>
Set command:
-5TZ<0D>
Message Response:
R<0D>
NTP IP Address
Description:
This command will get or set the NTP IP address needed to contact
the timeserver.
Get command:
NI<0D>
