Page 36 Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010
Get command:
LN<0D>
Message Response:
current value<0D>
Example:
Send Command:
LN<0D>
Response:
81.0<0D>
Set command:
81.0LN<0D>
Message Response:
R<0D>
Latitude
Description:
This command will get or set the latitude coordinates.
Get command:
LA<0D>
Message Response:
current value<0D>
Example:
Send Command:
LA<0D>
Response:
28.0<0D>
Set command:
28.0LA<0D>
Message Response:
R<0D>
Reboot
Description:
This command will perform a hard reboot of the system.
Comments:
The V16Pro will reload and run the selected script. The normal
power on response will apply
Command:
XX<0D>
Message Response:
K<0D> (after reboot complete)
IP address
Description:
This command will get or set the selected port IP address. Port A
or B may be selected
Comments:
Where xxx is a decimal number in the range of 0 – 255.
Get command:
(A or B)IP<0D>
Message Response:
xxx.xxx.xxx.xxx<0D>
Set command:
xxx.xxx.xxx.xxx(A or B)IP<0D>
Message Response:
R<0D>
Subnet Mask number
Description:
This command will get or set the number used to isolate the subnet.
Comments:
xxx is a decimal number in the range of 0 – 255.
