Alcolizer HH3 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 23

Alcolizer HH3 Скачать руководство пользователя страница 17

REF: Alcolizer HH3 Alcohol Tester User Manual V6

Page 17

© Alcolizer Technology

Uncontrolled when printed

Figure 21 - Records module

•

Press the Up/down keys to navigate through records as required.

•

Press the Test key to exit records module.

5

CALIBRATION

The Alcolizer HH3 requires re-calibration every six months as per Australian Standards
Certification requirement.

Upon start up, the company logo screen displays the number of days to recalibration due.
To permanently display days to recalibration, instrument serial number and date and time,
hold the Test key down for extended period upon start up. This will freeze the screen so the
information can be read.

When re-calibration warning message period has expired, the Recalibration Due Now is
displayed and the device is locked, preventing any further breath tests until the device is
recalibrated.

It is recommended that the device be returned to Alcolizer Technology for calibration prior
to the number of days to recalibration warning message expiring. This will avoid the inability
and inconvenience of not being able to perform further breath testing when required.

Contact Alcolizer Technology by any of the following means:

•

Phone: 1300 789 908;

•

Email:

[email protected]

; or

•

Web:

www.alcolizer.com

«
...
15
16
17
18
19
...
»

Содержание HH3
























Отзывы:

Нет отзывов