12/27
C 50
Alcatel Vacuum Technology France - ASM 180 TD/TD+ - ASM 181 TD+ User’s Manual
Alphanumeric Control and Display
Panel (ACDP) operation
Edition 03 - May 97
Working in
automatic mode
Vacuum test
Display of the
test result
Basic display
Indicates alternately:
- Previous test result (see
page 13
),
- Auto cycle standby message,
- Next test No.,
- Selected part reference.
Roughing time count down
Test time count down
Selection of Serial Nr or Test Nr in
part modification menu:
page 19
.
At the end of each validated test,
a serial number for the tested part,
incremented by one over
the previous one, is proposed.
Possibility to manually modify it
with
the and key.
Systematic validation by key
.
Note: if a cycle is started using
the key
before validation,
this cycle is stopped and is not
taken in account.
Return to the basic display.
The test number (TEST Nr) or
Serial number (SERIAL Nr) is
incremented for the next test. The
display of the result, the possible
emission of an audio signal and the
printing of a test ticket depend on
the programmed test parameters for
the selected part (see part
modification menu :
page 15
).
F
▼
▲
If SERIAL Nr and ticket test and printer
are selected.
If Nr TEST is
selected
Start a test
or
C
▲
▼
F
FILE # : 1
READY/AUTO. CYCLE
AUTO/ROUGHING
…S
AUTO/FL : 1.8E-10
…S
SERIAL # ? :
23
