4/27
C 50
Alcatel Vacuum Technology France - ASM 180 TD/TD+ - ASM 181 TD+ User’s Manual
Alphanumeric Control and Display
Panel (ACDP) operation
Edition 03 - May 97
The basic display gives information which depends on the
operating mode (automatic or manual) in which the detector
was previously configured.
Using the basic display, the user can:
• start a test cycle
(
or key);
• access the various configuration menus
;
Pressing only the key makes it possible to return to the
basic display without modifying any configuration
parameters.)
• perform an autocalibration
.
See the following pages for further details.
C
Unit
start-up
(see also
C 10
)
Basic display
The control panel and remote
control unit keys are not functional
during this start-up phase.
Basic display
The time is counted down until the
analyzer cell filament comes on.
F
START UP
XX min YY sec
AUTOCALIBRATION
IN PROGRESS
CAL. COMPLETED
FIL/ON : 1.0E-10
READY/MAN. CYCLE
FILE # : 1
READY/AUTO CYCLE
If
MANUAL
mode selected
If
AUTOMATIC
mode selected
