Alcatel-Lucent OmniSwitch 9000 Series, Руководство по началу работы

Страница: 10 / 44

6 Installing the Hardware May 2007
Note. Alcatel-Lucent provides factory-installed blank
cover plates for empty module slots. Do not remove these
cover plates as they play an important role in chassis
ventilation.
8 With one hand, grasp the handle at the front of the
power supply and slowly pull the power supply out of the
power supply bay.
Do not pull the power supply
completely out of the bay with one hand.
9 When the power supply is pulled out far enough (about
10”), place your other hand under the power supply casing
to support its weight.
10 Continue pulling the power supply out until it is
removed from the chassis.
11 Set the power supply aside on a clean, static-free
surface. You will need to re-install it later.
12 Remove all remaining power supplies by repeating
steps 7 through 11.
13 Continue to “Lifting the Chassis” below.
50/60
Hz,
8.0/7.0/3.5
A
100/
115/250V
OV
ER
TEMP
DC
OK
AC OK
50/60H
z, 8.0/7.0/3.5
A
100/
115/
250
V
EM
P
50/60Hz,
8.0/7.0/3.
5 A
100/
115/
250V
OV
ER
TEMP
DC OK
AC
OK
50/6
0H
z, 8.0
/7.0
/3.5
A
100/
115
/25
0V
EM
P