Alcatel-Lucent OmniSwitch 9000 Series, Руководство по началу работы, Страница: 14 / 44

10 Installing the Hardware May 2007
To rack-mount the RJ-45/RJ-45 Patch Panel for use with the
OS9-GNI-C48T, follow the steps explained below:
1
Remove all the connections before rack mounting the
RJ-45/RJ-45 patch panel.
2 Rack-mounting the RJ-45/RJ-45 patch panel requires
two people— one person to hold the RJ-45/RJ-45 patch
panel and position it in the rack and a second person to
secure the RJ-45/RJ-45 patch panel to the rack using the
attachment screws.
3 Mark the holes on the rack where the RJ-45/RJ-45
patch panel is to be installed.
4
Using one person, lift and position the RJ-45/RJ-45
patch panel until the rack-mount flanges are flush with the
rack post.
5 Align the holes in the flanges with the rack holes you
marked in step 3.
6 Once the holes are aligned, use a second person to
insert a screw through the bottom hole on each flange .
Tighten both screws until they are secure.