Alcatel-Lucent OmniSwitch 9000 Series, Руководство по началу работы

Страница: 24 / 44

20 Your First Login Session May 2007
In order to complete the setup process for the switch, you must
complete the following steps during your first login session:
•
Log in to the switch
•
Set IP address information for the Ethernet
Management Port (EMP)
•
Unlock session types
•
Change the login password
•
Set the date and time
•
Set optional system information
•
Save your changes
Important. You must be connected to the switch via the
console port before initiating your first login session.
Logging In to the Switch
When you first log in to the switch, you will be prompted for a
login (i.e.,
user ) name and password. During this first login
session, only one user name option and one password option is
available:
•
Login (i.e., user name)— admin
•
Password— switch
To log in to the switch, enter admin at the login prompt:
login: admin
Next, enter the factory default password, switch , at the pass-
word prompt:
password: switch
The default welcome banner, which includes information such
as the current software version and system date, is displayed
followed by the CLI command prompt:
Welcome to the Alcatel-Lucent OmniSwitch 9000
Software Version 6.1.5.281.R01 Development, March 16,
2007.
Copyright(c), 1994-2007 Alcatel-Lucent All Rights
reserved.
OmniSwitch(TM) is a trademark of Alcatel-Lucent regis-
tered in the United States Patent and Trademark Office.
->
Your First Login Session