Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 1886 / 2018

AAA Commands
page 43-46 OmniSwitch 6250 CLI Reference Guide November 2009
user lockout-duration
Configures the length of time a user account remains locked out of the switch. At the end of this time
period, the user account is automatically unlocked.
user lockout-duration minutes
Syntax Definitions
minutes The number of minutes the user account remains locked out. The range
is 0 to 99999.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
This command is only available to the admin user because the admin user account is the only account
protected from any type of lockout attempt.
•
Note that if the lockout duration time period is set to zero (the default), then locked user accounts are
never automatically unlocked.
•
Only the admin user or a user with read/write AAA privileges can unlock a locked user account when
the lockout duration time is set to zero. An account is unlocked by changing the user password or with
the
user lockout unlock command.
•
Do not configure a lockout duration time period that is less than the amount of time configured for the
observation window.
•
The lockout duration time period is a global lockout setting that is applied to all passwords configured
on the switch.
•
Lockout settings are saved automatically ; that is, these settings do not require the write memory , copy
running-config working , or configuration snapshot command to save user settings over a reboot.
Examples
-> user lockout-duration 60
-> user lockout-duration 0
Release History
Release 6.6.1; command was introduced.
parameter default
minutes 0