Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 585 / 2018

Distributed Spanning Tree Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 16-145
show spantree cist ports
Displays Spanning Tree port information for the flat mode Common and Internal Spanning Tree (CIST)
instance.
show spantree cist ports [forwarding | blocking | active | configured]
Syntax Definitions
forwarding Displays Spanning Tree operational port parameters for ports that are
forwarding for the CIST instance.
blocking Displays Spanning Tree operational port parameters for ports that are
blocked for the CIST instance.
active Displays a list of active ports associated with the specified instance.
configured Displays Spanning Tree administrative port parameters for the CIST
instance.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
This is an explicit Spanning Tree command that displays Spanning Tree port information for the flat
mode CIST instance regardless of which mode (1x1 or flat) is active on the switch.
•
Note that minimal information is displayed when this command is used in the 1x1 mode, as the CIST is
not active in this mode.
Examples
-> show spantree cist ports
Spanning Tree Port Summary for Cist
Oper Path Desig Prim. Op Op
Port St Cost Cost Role Port Cnx Edg Desig Bridge ID
-----+----+-------+-------+----+----+---+----+----------------------
1/1 FORW 200000 52 ROOT 1/1 PTP EDG 8000-00:30:f1:5b:37:73
1/2 DIS 0 0 DIS 1/2 NS No 0000-00:00:00:00:00:00
1/3 DIS 0 0 DIS 1/3 NS EDG 0000-00:00:00:00:00:00
1/4 DIS 0 0 DIS 1/4 NS No 0000-00:00:00:00:00:00
1/5 DIS 0 0 DIS 1/5 NS EDG 0000-00:00:00:00:00:00
1/6 DIS 0 0 DIS 1/6 NS EDG 0000-00:00:00:00:00:00
1/7 DIS 0 0 DIS 1/7 NS EDG 0000-00:00:00:00:00:00
1/8 DIS 0 0 DIS 1/8 NS No 0000-00:00:00:00:00:00
parameter default
forwarding | blocking | active |
configured all ports