manualshive.com logo in svg

Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 1994 / 2018

Поделиться
Скачать
Alcatel-Lucent OmniSwitch 6250 Скачать руководство пользователя страница 1994

Third Party Licenses and Notices

Software License and Copyright Statements

page A-30

OmniSwitch 6250 CLI Reference Guide

November 2009

This software is not subject to any license of Eindhoven University of Technology.Redistribution and use 
in source and binary forms are permitted only as authorized by the OpenLDAP Public License.

This software is not subject to any license of Silicon Graphics Inc.or Purdue University. Redistribution and 
use in source and binary forms are permitted without restriction or fee of any kind as long as this notice is 
preserved.

Y. BITMAP.C

Provided with this product is a program for personal and non-profit use.

Copyright (C) Allen I. Holub, All rights reserved.

Z. University of Toronto

Provided with this product is a code that is modified specifically for use with the STEVIE editor. Permis-
sion is granted to anyone to use this software for any purpose on any computer system, and to redistribute 
it freely, subject to the following restrictions:

1. The author is not responsible for the consequences of use of this software, no matter how awful, even if 
they arise from defects in it.

2.The origin of this software must not be misrepresented, either by explicit claim or by omission.

3. Altered versions must be plainly marked as such, and must not be misrepresented as being the original 
software.

Version 1.5

Copyright (C) 1986 by University of Toronto and written by Henry Spencer.

AA.Free/OpenBSD

Copyright (c) 1982, 1986, 1990, 1991, 1993 The Regents of University of California. All Rights Reserved.

Содержание OmniSwitch 6250



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов