Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 667 / 2018

Learned Port Security Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 19-19
port-security learn-trap-threshold
Configures the number of bridged MAC addresses to learn before sending a trap.
port-security slot/port[-port2] learn-trap-threshold number
Syntax Definitions
slot/port The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
-port2 The last port number in a range of ports you want to configure on the
same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
number The number of bridged MAC addresses (1–100) to learn before sending
a trap.
Defaults
By default, the number of bridged MAC addresses learned is set to 5.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
When the number of bridged MAC addresses learned on the port matches the specified threshold
amount, a trap is sent for every bridged MAC address learned thereafter.
•
Sending a trap when this threshold is reached provides notification of newly learned bridged MAC
addresses. Trap contents includes identifying information about the MAC, such as the address itself,
the corresponding IP address, switch identification, and the slot and port number on which the MAC
was learned.
Examples
-> port-security 1/10 learn-trap-threshold 6
-> port-security 1/10-13 learn-trap-threshold 18
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
learnedPortSecurityTable
lpsLearnTrapThreshold
show port-security Displays Learned Port Security (LPS) configuration and table entries.