Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 291 / 2018

Configuration File Manager Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 9-11
configuration snapshot
Generates a snapshot file of the switch’s non-default current running configuration. A snapshot can be
generated for all current network features or for one or more specific network features. A snapshot is a
single text file that can be viewed, edited, and reused as a configuration file.
configuration snapshot feature_list [path/filename]
Syntax Definitions
feature_list The description for the network feature(s) to be included in the
snapshot. You may enter more than one network feature in the
command line. Current snapshot-supported network features are listed
below.
path/filename A user-defined name for the resulting snapshot file. For example,
test_snmp_snap . You may also enter a specific path for the resulting
file. For example, the syntax /flash/working/test_snmp_snap places
the test_snmp_snap file in the switch’s /flash/working directory.
Defaults
If a file name is not specified, the default file name asc.#.snap is used. Here, # indicates the order in
which the default file is generated. For example, the first default file name to be generated is asc.1.snap ,
the second default file name to be generated is named asc.2.snap , etc. By default, all snapshot files are
placed in the root /flash directory.
Platforms Supported
OmniSwitch 6250
snapshot-supported features
802.1q ip-helper policy
aaa ip-routing qos
aip ipmr rdp
all ipms rip
bridge ipv6 ripng
chassis linkagg session
efm-oam loopback-detection snmp
ethernet-oam module stack-manager
health ntp stp
interface port-mapping vlan
ip pmm