Alberici LAND, Руководство оператора

Страница: 18 / 41

18
7.3.6.1.C E
NABLE
POS T
ERMINAL
(
IF PRESENT
):
Highlight the POS ENABLE line and press OK to modify its status: the cursor will highlight the present status of
the Terminal : make use of the “+” or of the “ - “ button -key to enable or disable it.
Press OK to return to the ENABLE POS function, and press “+” to shift to EXIT, then again OK to return
to the upper menu level.
7.3.6.2 Set up Dispensing Mode
The DISPENSING MODE function allows to set the way the machine reacts to the introduction of money (i.e.
change money immediately and automatically, or wait for the User to confirm after dropping the money in); it
also allows to set the coin denominations that can be individually delivered by the 4 hoppers.
Press OK to start the modification of the current setting: the mode latter setting (ex. AUTOMATIC) will be displayed.
When set to AUTOMATIC mode, and the Pay-out Table is disabled, the machine will pay out as much evenly as
possible from each hopper (e.g. 5 pcs from HP1, 5 pcs from HP2, 5 pcs from HP3, 5 pcs from HP4); if set to
AUTOMATIC mode, and the Pay-out Table is enabled, the machine will pay out the combination preset by the
Operator (see section 7.6.3.A).
SET UP PERIPHERAL UNITS
SET UP DISPENSING MODE
SET UP PAY-OUT TABLE
SET UP POS PAY-OUT TABLE
EXIT
SET UP DISPENSING MODE