Alberici LAND, Руководство оператора

Страница: 7 / 41

7
5.2 Mounting the unit
PAY ATTENTION: IT IS ESSENTIAL TO FASTEN THE MACHINE TO A SOLID
WALL BY USING RELIABLE EXPANSION BOLTS.
IT IS RECOMMENDED TO FASTEN THE UNIT TO THE WALL BY
USING THE DEDICATED MOUNTING SLAB (ref. MT0-AM16-V06).
Put the Change Machine in place and fasten it to the wall by
expansion bolts, through the “x” holes in the rear side of the
cabinet. Take care not to obstruct the power socket. In addition,
the large holes at the rear foot of the floorstand allow to secure
the machine to the floor by binding chain or pass-through bar.
The fastening slab allows to easily secure
the Change Machine to the wall:
cnce fixed the slab to the wall (see below), the machine can be hung
upon the
“w” slab’s hooks , and then comfortably fastened to it by
screws (“z” holes), or just left hanging so as to remove it at ease.
W
ALL
-
MOUNT SLAB
:
5.3
P
REPARATION FOR
U
SE
:
534
167
97
80
70
1
3
0
3
0
0
80
0
2
4
0
1
1
0

12
X
W
Z
X
X
X
X
X
Z
190
97
3
3
0
97
!
Rear view of the Change Machine:
‘x’ = fastening holes to the wall
‘z’ = fastening holes to the wall-mount slab
Z X X
Z X X
Prepare the tunnel for the power cable in
the wall (correspond ing to “Y” h ole in the
slab).
Slip the cable through the “Y” hole.
Fasten the slab to the wall by sturdy
expansion bolts, through the 6 “ x ” (

12
mm) holes.
Connect the cable to its socket behind the
machine, and hang the latter on the “ w ”
supporting hooks.
Fix the LAND unit to the slab by M8 screws
through the three “ z ” threaded holes, unless
you plan to remove the machine from the
wall every evening to store it in a safer
place.
All measures in mm
Z
40
45
Y
Z
1
3
0
70
97
167
2
9
0
50
220
340
W
W
W W
W
W
W