Alberici LAND, Руководство оператора

Страница: 17 / 41

17
7.3.6.1 Set up Peripheral Units
This section allows to set which banknote and coin denominations must be accepted; if POS device is included, its
operation can be enabled or disabled by this function.
7.3.6.1.A E
NABLE
N
OTES
(
NOTE DENOMINATIONS TO BE ACCEPTED
):
All the programmed note values (5-to- 100 Euro) are enabled (‘v’ = enabled) by default. To modify such condition, or
to change later modifications, press OK to get to the first denomination box (ex. 5 €), then press “ + ” or “ - ” to reverse
its status. Press OK to confirm (the sign ‘v’ will turn to ‘x’, and viceversa) and to shift to the next option (ex. 10 €).
Press OK to confirm and return to the upper level. Then press “ + ” to shift to the following line ( E
NABLE
C
OINS
).
7.3.6.1.B E
NABLE
C
OINS
By this function, the Operator can decide which coin denominations the machine must accept and which ones it
must reject and immediately return to the User.
The default coin denomination is 2 € for all 4 Hopper S11. If at least one Hopper AH4 (discriminator) is part of the
machine, default denominations are 0,50 € – 1,00 € – 2,00 €.
Press OK to get access to the modification controls. Press OK again to get to the first denomination box (ex.
2,00 €), then press “ + ” or “ - ” to reverse its status. Press OK to confirm the setting (the sign ‘v’ will turn to ‘x’, and
viceversa) and to shift to the next box (ex. 1,00 €).
‘v’ = enabled
‘x’ = disabled
(*) Only if the Note
Recycler is connected
‘v’ = enabled
‘x’ = disabled
COIN ACCEPTOR: PRESS OK
NOTE VALUE (*) PRESS 0K
POS ENABLE? NO
EXIT
COIN ACCEPTOR: PRESS OK
NOTE VALUE (*) PRESS 0K
POS ENABLE? NO
EXIT
(*) Only if the Note
Recycler is connected