Albemarle 290 EXPRESS FISHERMAN, Руководство пользователя

Страница: 78 / 134

290 XF
78
unexpectedly. When the last bracket is released, the berth can
be carefully lowered to the backrest position.
Carbon Monoxide Detector
A carbon monoxide (CO) detector is installed in the cabin.
If excess carbon monoxide fumes are detected, an audible
beeping will sound indicating the presence of the toxic gas.
The CO detector is always activated whenever the batteries
are connected.
A by‑product of combustion, carbon monoxide is invisible,
tasteless, odorless, and is produced by all engines, heating
and cooking appliances. The most common sources of CO
on boats are the engines, auxiliary generators and propane
or butane stoves. These produce large amounts of CO and
should never be operated while sleeping.
Please read the owner’s manual supplied by the detector
manufacturer for operation instructions and additional
information regarding the hazards of carbon monoxide gas.
Also read more about carbon monoxide, carbon monoxide
detectors, and proper ventilation in the Ventilation Systems
and Safety Equipment chapters in this manual. This is
especially essential if your boat is equipped with the optional
generator. If you did not receive a manual for your carbon
monoxide detector, please contact the Albemarle Customer
Service Department.
ACTIVATION OF THE CARbON MONOXIDE
DETECTOR INDICATES THE PRESENCE OF
CARbON MONOXIDE (CO) WHICH CAN bE FATAL.
EVACUATE THE CAbIN IMMEDIATELY. DO A
HEAD COUNT TO CHECK THAT ALL PERSONS
ARE ACCOUNTED FOR. DO NOT REENTER THE
CAbIN UNTIL IT HAS bEEN AIRED OUT AND THE
PRObLEM FOUND AND CORRECTED.
10.6 Cabin Woodwork
The cabin floor can be fiberglass, carpeted or be equipped with
the optional hardwood sole. The floor and steps are finished
with a high quality urethane finish that will provide years of
protection with proper care and treatment. It is important
to avoid tracking sand and dirt on the cabin floor and steps.
Sand and dirt acts like sand paper and will eventually sand off
the finish in the traffic areas. The wood can be sanded and
refinished as necessary.
Use caution when varnishing wood steps. The wood grain is
a natural nonskid and too much varnish or polyurethane will
fill the grain and make the wood slippery. You should use a
satin or flat varnish and only apply one or two coats.
Cabin Carbon Monoxide Detector
Pullman Berth Support Bracket with Berth in the Up Position
R
ELEASE
L
EVER
V-Berth with Pullman Berths in the Up Position