1
Instructions for operation
English
Uso Vasche IDROP / DIGIT - Code 10004904 - Edition 3 - 09/2007
2
1
No
No
fu
lgor 3002
ste
eril 100 td
f
tdf 80
decal
1000 ml
e
td 68
Congratulations
We are delighted that you have chosen this
Albatros appliance, which is designed and built
using the most sophisticated technology.
Our wide range of functional and reliable
hydromassage tubs offers the ideal way of
maintaining a feeling of well-being, and will help
you to achieve perfect harmony and equilibrium,
re-vitalizing the body and relaxing the mind.
A combination of elegant design and ergonomic
shape, together with the latest in technology, will
ensure maximum comfort as you relax to enjoy
the gentle or vigorous effects of a hydromassage
system that can be adjusted exactly as desired
and is designed to suit users of all builds.
Your Albatros tub will enable you to adjust the
hydromassage action exactly as desired by
regulating the intensity of the jets and their
direction, selecting the various functions and
adjusting the water-air mix to suit your personal
preference.
This manual, in which the
fi
rst section is common
to all versions of hydromassage tubs, also
contains speci
fi
c information about the operation
and disinfection procedures for each individual
model.
How to use the hydromassage system
(Instructions valid for all models)
This paragraph describes the procedure
necessary to operate the hydromassage system,
as well as a number of practical suggestions.
Please remember that it is advisable to allow at
least two hours after a meal before a relaxing
massage.
First, switch the appliance on using the main
ON/OFF switch. Then
fi
ll the tub until the level
of the water is 5 - 6 cm above the hydromassage
nozzles.
The ideal water temperature for an effective
hydromassage is very slightly above normal
body temperature, i.e. about 37°C. If you add
essences to the water, read the instructions on
the product with care; if these products are not
speci
fi
cally designed for use with hydromassage
systems, they may produce excessive foam when
the water is agitated.
To start (or stop) the hydromassage cycle, refer to
the speci
fi
c operating instructions in the second
section of this manual.
The duration of the hydromassage cycle depends
on personal taste; however it should be borne
in mind that long hydromassage treatments may
lower the blood pressure or cause excessive
muscular relaxation.
When using the hydromassage system for the
fi
rst few times, it is advisable to limit the duration
of the cycle to between 10 and 20 minutes, then
to work up to the standard duration for the cycle
(30 minutes), which is more than suf
fi
cient to
obtain the bene
fi
cial effects of the hydromassage
treatment.
After a hydromassage session, check that all
the nozzles are open and exit the tub. Start the
disinfection system to clean the internal parts of
the hydromassage circuit (refer to the instructions
relative to the disinfection system
fi
tted to the
appliance).
It is advisable to sit or lie down in a comfortable
position for ten to twenty minutes after a
hydromassage in order to enjoy the fullest
effect.
Routine maintenance
Cleaning the tub
The tub is built using materials which are easy
to clean and inhibit the build-up of bacteria on
the surface.
It is advisable to clean the tub regularly, preferably
using the speci
fi
c products available from our
authorized dealers and Service Centres.
If you prefer to use other products, the following
recommendations should be followed:
1) Always use a soft cloth; never use abrasive
cleaning products (pads etc.).
2) Never use powder detergents. Always use
good-quality liquid detergents which contain
no alcohol or ammonia.
3) Never use acetone, ammonia or products
containing these substances, as these can
seriously damage the tub. Similarly, never
use products containing formic acid or
formaldehyde.
4) Stubborn stains can be removed using
liquid detergent, silver polish or toothpaste
(depending on the type of stain) and rubbing
gently with a soft cloth.
5) To remove scale stains from the surface, use
lemon juice or vinegar (hot if possible) and
rub gently with a soft cloth.
Cleaning the Sanijet nozzles
In order to maintain perfect ef
fi
ciency, the nozzles
should be dismantled and cleaned at regular
intervals in order to remove any sediment or
scale.
Use the special wrench to rotate the nozzle
counter-clockwise until the internal ring can be
removed.
Extract the nozzle, dismantle and clean.
To replace the nozzle, perform the same
procedure in reverse.
Содержание Kellia Combi 170
Страница 6: ......
