Alaxala AX3630S, Руководство пользователя программного обеспечения

Страница: 859 / 875

40. Error Messages Displayed When Editing the Configuration
831
Minrate must be less than maxrate. The minimum bandwidth rate is not smaller than the maximum bandwidth
rate.
For the minimum bandwidth rate, set a value smaller than the maximum
bandwidth rate.
Over two entry as an address family cannot
be set. Another QoS flow list has already been applied.
If you want to apply a QoS flow list, first delete the existing QoS flow list
that has already been applied.
Range-Start must be less than Range-End. The start value of a range specification is not smaller than the end value.
For range specifications, make sure that the start value is smaller than the
end value.
Set value of DRR weight parameter is not
same group.
The value set for the DRR weight parameter is not in the same group.
Specified traffic-shape rate value is
incorrect, or it is out of range.
The bandwidth rate specified for port bandwidth control is either incorrect
or outside the specifiable range.
The maximum number of entries are
exceeded. The number of QoS entries exceeds the capacity limit.
The number of used entries and available entries in the configuration can be
checked by using the
show system
operation command.
The maximum number of TCP/UDP port
entries are exceeded.
The number of entries used to specify the range of TCP/UDP port numbers
exceeds the maximum.
A maximum of 16 patterns can be used for filter and QoS entries to specify
the range of TCP/UDP port numbers.
The number of used entries and available entries in the configuration file
can be checked by using the
show system
operation command.
The total of min-rate exceeded bandwidth of
port. The total of the specified minimum guaranteed bandwidths exceeds the
bandwidth.
Set the value to be equal to or smaller than the bandwidth.
The total of WFQ min-rate exceeded
bandwidth of traffic-shape rate.
The total of the minimum guaranteed bandwidths for the WFQ mode
exceeds the bandwidth of port bandwidth control.
Set the total of the minimum guaranteed bandwidths for WFQ mode so that
the value is equal to or smaller than the bandwidth of port bandwidth
control.
This list cannot be set to this interface,
because the list includes copy-user-priority
parameter.
The copy-user-priority parameter in the action specification cannot be
applied to this interface. If the copy-user-priority parameter is specified in
the action specification in a QoS flow list, apply that QoS flow list to an
Ethernet interface with VLAN tunneling configured, or delete this
parameter from the action specification.
This list cannot be set to this port. This QoS flow list cannot be applied to this Ethernet interface.
To apply a QoS flow list to an Ethernet interface, the VLAN ID of a flow
detection condition in the QoS flow list must be included in the settings of
the Ethernet interface to which you want to apply the list.
This list cannot be set to VLAN. This QoS flow list cannot be applied to VLAN interfaces.
If the VLAN ID is set as a flow detection condition in a QoS flow list, the
QoS flow list cannot be applied to the VLAN interface. Apply it to an
Ethernet interface or delete the VLAN ID from the detection condition.
This list name is being used as other protocol
type by other definition.
The name has already been used for another QoS flow list.
Specify a name that is not being used for another QoS flow list or specify
the correct name of an applicable QoS flow list.
Message Description