Alaxala AX3630S, Руководство пользователя программного обеспечения

Страница: 33 / 875

1. Reading the Manual
5
Specifiable values for parameters
The following table describes the values that can be specified for parameters.
Table 1-2: Specifiable values for parameters
Parameter type Description Input example
Name Alphabetic characters can be used for the first
character, and alphanumeric characters, hyphens
(
-
), underscores (
_
), and periods (
.
) can be used for
the second and subsequent characters.
ip access-list standard inbound1
Host name For a host name, alphabetic characters can be used
for the first character, and alphanumeric characters,
hyphens (
-
), and periods (
.
) can be used for the
second and subsequent characters.
ip host telnet-host 192.168.1.1
IPv4 address,
IPv4 subnet mask Specify these items in decimal format, separating
1-byte decimal values by a period (
.
).
192.168.0.14
255.255.255.0
Wildcard mask The same input format as IPv4 addresses. The set
bits in an IPv4 address represent an arbitrary value. 255.255.0.0
IPv6 address Specify this item in hexadecimal format, separating
2-byte hexadecimal values by colons (
:
).
3ffe:501:811:ff03::87ff:fed0:c7e0
Specification of multiple
interfaces
Set the information about multiple interfaces.
Specifiable interfaces are gigabitethernet,
tengigabitethernet, vlan, and port-channel. You can
specify gigabitethernet and tengigabitethernet
interfaces at the same time, but cannot specify any
other interfaces at the same time.
The following are the input formats:
• For gigabitethernet
interface range gigabitethernet
<nif no.> / <port
no.> [- <port no.> ]
•
For tengigabitethernet
interface range tengigabitethernet
<nif no.> /
<port no.> [- <port no.> ]
•
For vlan
interface range vlan
<vlan id> [- <vlan id> ]
•
For port-channel
interface range port-channel
<channel group
number> [- <channel group number> ]
You can specify no more than 8 of the above input
formats, separating each by a comma (
,
).
interface range gigabitethernet 0/1-3
interface range gigabitethernet 0/1-3,
gigabitethernet 0/11-13
interface range vlan 1-100
add/remove specification Add to or delete from the information when
multiple interfaces have been specified.
The add specification adds information to the
current information.
The remove specification deletes information from
the current information. switchport trunk allowed vlan add
100,200-210
switchport trunk allowed vlan
remove 100,200-210
switchport isolation interface add
gigabitethernet 0/1-3,
tengigabitethernet 0/25-26
switchport isolation interface remove
gigabitethernet 0/1-3,
tengigabitethernet 0/25-26