Alaxala AX3630S, Руководство пользователя программного обеспечения

Страница: 121 / 875

7. Device Management
93
swrt_table_resource
Sets the allocation pattern for the number of entries in a routing table for a switch. By changing the
allocation pattern according to the operating mode, you can concentrate resources on the necessary
tables.
You need to restart the switch to enable the changes in the settings. Accordingly, you must set this
command during the first step of actual operation.
Syntax
To set or change information:
swrt_table_resource { l3switch-1 | l3switch-2 | l3switch-3 } [AX3640S]
swrt_table_resource { l3switch-1 | l3switch-2 } [AX3630S]
To delete information:
no swrt_table_resource
Input mode
(config)
Parameters
{ l3switch-1 | l3switch-2 | l3switch-3 } [AX3640S]
{ l3switch-1 | l3switch-2 } [AX3630S]
l3switch-1
IPv4 mode. This pattern allocates resources to both IPv4 and IPv6 routing.
l3switch-2
IPv4 or IPv6 mode. This pattern allocates resources to both IPv4 and IPv6 routing.
l3switch-3
IPv6 unicast priority mode. This pattern allocates more resources to IPv6 unicast routing.
The following table lists the number of table entries for each allocation pattern:
Table 7-1: Number of table entries for each allocation pattern [AX3640S]
Legend n/a: Not applicable
#: When ARP and multicast routing are used together, the maximum number of total entries is
5120.
Item Number of table entries for each allocation pattern
l3switch-1 l3switch-2 l3switch-3
IPv4 Unicast route 12288 8192 1024
Multicast route 1024 256 16
ARP
5120
#
1024 128
IPv6 Unicast route n/a 2048 5632
Multicast route n/a 128 16
NDP n/a 1024 1024