alatech AP1000, Руководство пользователя

Страница: 39 / 48

Operation Guide
36
6 Maintenance
To ensure the safety of the user and prolong the equipment’s life cycle, the bike needs to
be inspected and maintained on a regular basis. Please read and follow the instructions
below. If you have any questions regarding the maintenance of the equipment, please
contact customer service or your distributor.
Frequency Action
Daily Check and ensure the equipment is steady.
Before
use Check parts that are most susceptible to wear are not damaged or broken
(Pedal Straps, Pedal Cages).
After use Use a slightly damp cloth to clean on the saddle and handlebar.
Weekly Wipe down and thoroughly clean the bike using soft damp cloth.
Biweekly

Test if the brake functions properly. Testing method: Press the red
emergency brake while pedaling. The flywheel should slow down
(when being pushed down gradually) or stop completely (when being
pushed all the way down).

Inspect if there is any damage on the pedal straps.

Lubricate the saddle and handlebar posts according to the image below
(A, C). Pull up the saddle and handlebar posts to the highest position
and spray the silicone-based lubricant on the surface. Wipe the entire
post with soft cloth. Once done, set the post back to normal position
and tighten the knobs.

Lubricate the handlebar and saddle slide bars (B, D). Release the
slide-bars, remove any foreign objects (if any) on the slide bar and use a
soft cloth to apply a small amount of silicon grease. Once complete, put
the slide bar back to normal position and tightened the knobs.