alatech AP1000, Руководство пользователя

Страница: 14 / 48

11
FireFly Training & Indoor Cycling
STEP 4
①
Assemble Quick-release L Knob
1) Please use A Screwdriver to remove F screw and end cap as shown
in the picture below.
2) Place D Slide Gasket into the slide bar.
3) Place the E Hex Bolt from the bottom to top through the
components and the D Slide Gasket, screw the C Adjustment Knob
to the E Hex Bolt.
4) Please put the parts removed in STEP 1, the screw and end cap
back on and tighten.
②
Use
A
the Open-ended Wrench to
tighten the saddle
Parts in
letters
Parts Images Specification
# of part
used
A Open-ended Wrench/ Screwdriver 1
B Saddle 1
C Adjustment Knob 1
D Slide Gasket 1
E
Hex Bolt （ M10 × 1.5 × 40L ）
1
B
A
Partial enlarged view
E
C
D
A
F