alatech AP1000, Руководство пользователя

Страница: 29 / 48

Operation Guide
26
5.2 Activity Mode
5.2.1 Quick Start
1) Start an Activity
1-1) Under Sleep Mode, press the button to wake up the console.
1-2) Select [Quick Start].
1-3) If you are using a heart rate monitor, make sure it is properly added and
connected.
☞ If you have added and connected a heart rate device via Set up
＞
5.1.6 Sensor
＞
Heart Rate Sensor, the console will automatically connect with your sensor.
When you start an activity, wait until
appears on the top right corner to
start pedaling.
1-4) Start pedaling.
☞ Once you start to pedal, the console will record the elapsed time automatically.
If no action is taken and the screen is left idle over 20 seconds, the console will
turn off automatically after a 9-second countdown. If you would like to maintain
the current display, click anywhere outside the message box to turn it off.
2) During activity: Swipe left or right to view different real-time data.
Heart Rate
1
→
Speed
2
→
Cadence
3
→
Power
4
☞ Press and hold for 2 seconds on the data field to change to the data you
preferred to display.
3) To pause the activity: please slow down your pedaling speed or press the brake. The
display time will stop automatically once the pedaling has stopped.

If you would like to resume, please continue pedaling.
 If you would like to prolong the pausing time, select +30" (Sec.) or +60" (Sec.).
☞ The longest pausing time in total is 300 seconds. Once the countdown is over
and no further action is taken, the activity is automatically over.
4) To End the activity: Swipe up from the bottom of the screen
＞
select [Finish
Exercise].
5) View your activity summary
：

Select : View Activity Report.

Select : View training graphics.

Select : Scan the QR Code with your mobile device > log in to gptfit.com to
store your record on the cloud.