4
DL3000 / DL2800
300 User Codes, 150 Schedules, 1600 Audit
Trail Events. Refer to OI224 for more
information on
DL3000
features.
DL-Windows also supports the similar
DL2800
, which supports 200 Users.
DL3500 / ETDL / ETPDL
DL3500
: 300 User Codes, 500 Schedules,
40,000 Audit Trail events. Refer to WI1005
for more information on DL3500 features.
ETDL
: 2000 User Codes, 500 Schedules,
40,000 Audit Trail Events.
ETPDL
adds Prox
capability
PDL3000 / PDL3500 / PDL3300
2000 User Codes/ProxCards
®
or ProxKey
®
keyfobs, 500 Schedules, 40,000 Audit Trail
Events. Refer to WI1021 for more information on
features. DL-Windows also supports the similar
PDL3500
mortise lock and
PDL3300
Door Ajar
lock with Prox capability.
Infrared Printer (AL-IR1)
An
AL-IR1
printer is used to print Audit Trails
and User Code lists (where used) without the
need for a PC. Its infrared reader means no
cable connection to the lock is needed.
Prox Card Reader/Enroller
(AL-PRE)
An
AL-PRE
is used to quickly enroll multiple
ProxCards
®
and ProxKey
®
keyfobs into DL-
Windows. Use the supplied 9-pin DB9 to DB9
serial cable to connect the AL-PRE to your com-
puter’s serial COM port. Compatible with most
HID ProxCards
®
and ProxKey
®
keyfobs (37 bits
or less). For PDL series locks only.
ProxCard
®
/ ProxKey
®
Keyfob
Compatible with most HID ProxCards
®
and
ProxKey
®
keyfobs (26-37 bits).
Note:
ProxCard
®
and ProxKey
®
are trademarks of the HID
©
Corporation.
H ID
HID CORPORATION
Double-ended Mini Banana Plug Connector (supplied)
After you create the program in DL-Windows and transfer the program from your computer to an
AL-DTM
,
transfer the program from the
AL-DTM
to the lock(s) via a double-ended mini banana plug. You can also
use this cable to transfer the Lock Program from your lock to an AL-PRE.
DB9 to DB9 Serial Cable (supplied)
Enroll ProxCards quickly into DL-Windows, then transfer this new ProxCard
®
data from the computer to the
AL-PRE
via this 9-pin DB9 to DB9 serial cable. Once the data is in the
AL-PRE
, you can transfer the data
to the lock via the double-ended mini banana plug (see above), thus avoiding the need to use an
AL-PCI2
cable for this process.
AL-PCI2 Cable
An ALARM LOCK
AL-PCI2
cable is required to communicate between your computer’s RS-232 serial commu-
nications port (COM 1-4) and the
AL-DTM
or lock. One end of the
AL-PCI2
cable is designed to be plugged
into a DB-9 male 9-pin serial COM port. If your computer has a 25-pin COM port only, a 25-pin to 9-pin adapter
must be used. The other end of the
AL-PCI2
cable features a 2-pin banana plug connector which is polarity
sensitive--the TAB (marked “GND”) side must be plugged into the lock’s
black
(left) terminal.
DK3000 / PDK3000
Relay-only locking device, 2000 Users, 500
schedules, 40,000 Audit Trail events. The
PDK3000
adds Prox capability.
DL / PDL4100 ("Privacy")
DL / PDL4500 ("Residency")
The "Residency" feature is specially designed
to prevent unintentional lock-out, and the
"Privacy" feature is designed to deny access to
other users after an individual enters. Refer to
WI1194 and WI1195 for more information.
All supported locks:
•
DL1200
•
DL1300
•
DL2800
•
DL3000
•
DL3200
•
DL3500
•
DL4100
•
DL4500
•
DK3000
•
ETDL
•
PL3000
•
PDL1300
•
PDL3000
•
PDL3300
•
PDL3500
•
PDL4100
•
PDL4500
•
PDK3000
•
ETPDL
Data Transfer Module
(
AL-DTM
)
The
AL-DTM
allows the transfer of Lock
Programs and other data between DL-Windows
and locks. See page 45 for detailed
AL-DTM
specifications and feature descriptions.
Note:
For DL-Windows versions 3.5 or higher,
the AL-DTM-III must be used, but will be referred
to as simply the "AL-DTM" in this manual.
Supported Products
